Driver Temma : init scope side

Step 3 : after click on "Temma Connect" button
Choices on start :
- Init on park location :
If it had been set this choice will sync the mount on your scope parking location.
You can then do a goto on the 1st star for making an accurate sync.
In this case just confirm with a click on OK button.
- Init Zenith :
This option makes things easy to do a goto on the 1st star for making an accurate sync.
In this case, place carefully before a bubble level on the front side of the scope to adjust the zenith direction (do it for RA and DEC directions)
Confirm the side the scope is on with a click on West or East side button.
- Init on current location :
When power is ON : RA 0:0:0 Dec 0:0:0 with scope in West side is the default location.
For the first sync you have to use your finder to catch and center the 1st star.
If the driver is restarted you get the last current location.
Confirm the side the scope is on with a click on West or East side button.
[Note]
W or E flags are returned on top right corner of main window.
You can later manualy switch the side as often you need, the driver will keep the current location after you switch E/W side.